Separable laser stone engraving machine is specially designed for the heavy duty stone, it brings more convenient to customers.
The machine is designed by upper part and lower part, the two parts can be separated. The the upper part can
movable, up and down moving, or take it off from the machine, directly putting on the stone, the lower part can
be configure suitable platform according to the customers need.
The design changes the traditional engraving method. For some heavy duty stone, we can put the upper part on to them directly, so that avoiding the difficulty of moving heavy material. Meanwhile, it solves the problem that platform has a limited bearing ability.
Both parts can be up and down so that engraving objects with greatly thickness-changing is much easier to process.
1. When your stone is thin, so no need to using the lifting shaft.
2. When your stone has the some thickness, then can rotating the lifting shaft to let the machine's upper part and lower par separate, the stone will be put into.
3. When the stone is very very thickness, you can't put into the machine, then can take off the upper part, and put it on the stone directly!
Effective working area
Type of laser
Sealed Co2 laser tube
Laser tube power
80W (RECI, Beijing)
Honey comb platform
Infrared positioning system
Linear square guide rail ( Hiwin,Taiwan)
Laser output control
1-100% software setting
Minimum forming characters
English letter 1mm Chinese 2mm
Leetro (MPC 6525)
Laser cut 5.3
Highest scanning accuracy
Type of cooling
Industrial chiller, CW-5000
Water protection system
Biggest scanning accuracy
Air pump and air blowser
AC 220V 50/60Hz, single phase
Supporting picture format
CorelDraw, PhotoShop, AutoCAD,TAJIMA, etc